DIY Cupcake Ornaments

-
I saw these really cute ornaments online that were selling for $20 each. They looked like they were pretty easy to make, so I took a stab at it. 

My daughter helped me make them, which was quite interesting.

First you will need to get your supplies:

Styrofoam Balls - I bought a pack of 6 from Joann's Fabric
Glue  
Glue Gun
Glitter 
Bells
Cupcake cups
Paint brush - optional
String/wire

One you have all your supplies, I would suggest to lay out some newspaper. This may get a little messy. Well, with my little helper, things got pretty messy.


Take your ball, and glue the top half. I swirled the glue, then used the brush to spread it evenly all over the top half. 

Now, cover the glued half with your glitter. Shake off any excess. If you have any spots that are not covered, just dab a little glue and sprinkle on the glitter. 

Take your cup and glue the upper edge. Make sure to glue all the way around.

Take your ball and push it gently into the cup. You do not need to push it all the way down. gently push it as far as you would like. While holding the ball and pushing it down, I took some of the glitter off. Either you can let the ball dry before this step, or go back after and add more glitter and glue to the bald spots. As you can see, I have major bald spots where the ball meets the cup. No problem! I went back, added glue and more glitter to fix this problem. 

Next, you will need to add a dab of hot glue to the top center of your cupcake, and attach the bell. You will want the top of the ball facing up so you can attach your strin gto hang the ornament on the tree. 
Sorry, I didn't take a picture of this step.

Let it dry!!






Now tie your string or wire to the top of the bell and you are all done!! 

I have more colors of glitter to use, but I stopped at these two. It got a little too messy. My daughter was more interested in playing with the glitter that was in the plate than anything. She even somehow was able to get it into her mouth! She might have been a little too young to help with this one, so you may want to do this project with the older kids. :)

Happy ornament making!

Comments

Post a Comment

Popular posts from this blog

DIY Hooded Towels

-
Image
I just love the baby hooded towels, but my little one has grown out of them. I have been using regular towels on her, and I miss the hood. I came across this tutorial on how to make large sized hooded towels, but can't seem to find the tutorial anymore. I tried to recall as best I could, and tried to make a couple, here is what I came up with... This hooded towel is so easy to make and I LOVE how big they are! You can make any color you want, and add any color ribbon or fabric strips to the hood! Here is how I made this: First you will need a regular sized towel and a hand towel. You can also get matching ribbon or scrap fabric strips to add to the hood if you would like. I bough my two towels at Wal-Mart on sale for a little over $5. Take your hand towel, and cut it around 24 inches long. Fold your hand towel in half lengthwise, and cut your ribbon to the same size as the towel. Pin your ribbon to the towel, about 1 inch from the fold.  Now o...
Read more

Maxi Skirt Tutorial

-
Image
Here is a maxi skirt I made and wore for Thanksgiving. It is so easy and inexpensive to make!  Material: Fabric: You will need to pick out the fabric material and color you want. I used a stretch knit from Joann's Fabric. (Don't forget to use your coupons when buying your fabric!) Elastic band First, you will need to measure how much fabric you will need. I measured from where I wanted the skirt to start, down to the floor, for the length. For my skirt, I got 45'' in length (keep in mind the type if shoes you will be wearing with your skirt. For flats, it will need to be shorter, for heels, measure longer.) The great thing about this material is that I did not need to finish any edges! It will not fray and looks fine unfinished. Woo hoo! :) Next, you will need to measure your waist for the elastic length. Keep in mind that your length will need to be about an inch shorter than your waist measurement. The elastic will stretch and fit your waist snug. If ...
Read more

Graduation Cupcake Stand

-
Image
Here is a graduation cupcake stand I was asked to make for a party this Saturday. The school colors are hunter green and gold. I bought the fabric and trims from Joann's fabric. The top is a graduation cap with a tassel I made. I took a 10inch cake board, and cut it into a 7'' square, then wrapped it in back. I added a button that I wrapped in the same black fabric and a tassel I made out of embroidery thread. The great thing about the top, is that you can put cupcakes on it as well as the other layers! Find the cupcake stand tutorial HERE ! Check out the new post !  Nook update!
Read more